Hybrid Inverter Deye SUN-6K-SG05LP1
The Deye hybrid inverter is suitable for residential and commercial use; it maximizes the rate of self-consumption of solar energy and increases your energy independence. During the day, the photovoltaic system generates electricity, which is initially supplied to the loads. Excess energy is then used to charge the battery via the SUN 6-SG. The stored energy can then be released as needed. The inverter is equipped with an RS485/CAN port to communicate with the battery. Thanks to an intelligent monitoring platform, the full range of Deye inverter products supports remote shutdown immediately upon the occurrence of emergencies. Remote parameter configuration and firmware updates simplify the operation and maintenance of photovoltaic systems. Features: Self-consumption and grid feeding; Automatic restart upon AC restoration; Programmable power priority for battery or grid; Multiple programmable operating modes: grid-connected, off-grid, and UPS; Application-based configuration of battery charge current/voltage via LCD display settings; AC/Solar/Generator charger priority, configurable via LCD display settings; Compatible with grid voltage or a generator; Overload/overheat/short-circuit protection; Intelligent charger design to optimize battery performance; Limitation function prevents excess power from being fed back into the grid; Supports Wi-Fi monitoring and features 2 strings per MPP tracker and 1 string per MPP tracker; Intelligently adjustable three-stage MPPT charging to optimize battery performance; Usage time function; Smart load function. Advantages: Color touchscreen LCD, IP65 protection rating; DC and AC pairs for upgrading an existing solar system; Max. 16 units in parallel for grid-tied and off-grid operation; Support for multiple batteries in parallel; Max. charge/discharge current 190A; 6 timed battery charge/discharge modes; Support for energy storage from a diesel generator.
| Default | |
| Battery voltage range | 40-60V |
| Charging curve | 3 Stages/Alignment |
| DC injection 1 | <0.5% ln |
| DC voltage range at full load | 300~425V |
| EMC Safety / Standard 1 | IEC/EN 62109-1,IEC/EN 62109-2,IEC/EN 61000-6-1,IEC/EN 61000-6-2,IEC/EN 61000-6-3,IEC/EN 61000-6-4 |
| Euro efficiency | 96.50% |
| External temperature sensor | Installed |
| Input current PV | 13A+13A |
| Input voltage PV | 370V (125V~500V) |
| Max. AC | 30/28.7A |
| Max. charging current 1 | 135A |
| Max. continuous AC passage | 40A |
| Max. DC input power | 7800W |
| Max. output power of the speaker system | 66000W |
| MPPT range | 150~425V |
| Number of MPPT trackers | 2 |
| Number of strings per MPPT tracker | 1+1 |
| Operating temperature range | -40–60°C, >45°C reduction |
| Output frequency and voltage | 50/60Hz; 220/230 |
| Output overcurrent protection | Integrated |
| Output overvoltage protection | DC Type II / AC Type III |
| Output short-circuit protection | Integrated |
| Overvoltage protection | DC Type II / AC Type II |
| Protection from islands | Integrated |
| PV input lightning protection | Integrated |
| PV input reverse polarity protection | Integrated |
| Residual current monitoring unit | Integrated |
| Size (L*W*H) | 330Ш×580В×232Г |
| Total harmonic distortion (THD) | <3% (of rated power) |
| Warranty | 5 years |
| Weight | 20.5 кг |
-
$720.00





