Deye SUN-5K-SG03LP1-EU
Suitable for residential and commercial use, the Deye Hybrid Inverter maximizes your solar self-consumption rate and increases your energy independence. During the day, the photovoltaic system generates electricity that will initially be supplied to the loads. The excess energy will then charge the battery through the SUN 5-SG. The accumulated energy can then be released when needed. The inverter is equipped with an RS485/CAN port to communicate with the battery. With an intelligent monitoring platform, Deye full series inverter products support remote shutdown immediately when emergency situations occur. Remote parameter settings and firmware updates simplify the operation and maintenance of photovoltaic installations. Features: Own consumption and output to the network; Automatic restart when AC is restored; Programmable power priority for battery or network; Several programmable operating modes: on-line, off-line and UPS; Application-based battery charging current/voltage configuration via LCD display settings; AC/Solar/Generator charger priority, which can be configured via LCD display setting; Compatible with mains voltage or generator; Overload/overheat/short circuit protection; Reasonable charger design to optimize battery performance; The limiting function prevents excess power into the network; Support WIFI monitoring and built-in 2 Strings for 1 MPP tracker, 1 String for 1 MPP tracker; Intelligently customizable three-stage MPPT charging to optimize battery performance; Time of use function; Smart load function. Advantages: Colorful touch LCD, protection degree IP65; Pair of DC and AC for retrofitting existing solar system; Max. 16 pcs. parallel to work online and offline; Support multiple batteries in parallel; Max. charging/discharging current 190A; 6 temporary battery charging/discharging modes; Support energy storage from diesel generator.
| Default | |
| Battery voltage range | 40-60V |
| DC injection 1 | <0.5% ln |
| DC voltage range at full load | 300~425V |
| EMC Safety / Standard 1 | IEC/EN 62109-1,IEC/EN 62109-2,IEC/EN 61000-6-1,IEC/EN 61000-6-2,IEC/EN 61000-6-3,IEC/EN 61000-6-4 |
| Euro efficiency | 96.50% |
| External temperature sensor | Есть |
| Input current PV | 13A+13A |
| Input voltage PV | 370V (125V~500V) |
| MPPT range | 150~425V |
| Number of strings per MPPT tracker | 1+1 |
| Operating temperature range | -40~60℃, >45℃ понижение |
| Output frequency and voltage | 50/60Hz; 220/230 |
| Output overcurrent protection | Интегрировано |
| Output overvoltage protection | DC Type II / AC Type III |
| Output short-circuit protection | Интегрировано |
| Overvoltage protection | DC Type II / AC Type II |
| Protection from islands | Интегрировано |
| PV input lightning protection | Интегрировано |
| PV input reverse polarity protection | Интегрировано |
| Residual current monitoring unit | Интегрировано |
| Size (L*W*H) | 330Ш×580В×232Г |
| Warranty | 5 лет |
| Weight | 20.5 кг |
| Количество трекеров MPPT | 2 |
| Коэффициент нелинейных искажений (THD) | <3% (от номинальной мощности) |
| Кривая зарядки | 3 Этапа/Выравнивание |
| Макс. AC | 25/23.9A |
| Макс. входная мощность DC | 6500W |
| Макс. выходная мощность АС | 5500W |
| Макс. непрерывное прохождение АС | 35A |
| Макс. ток заряда 1 | 120A |
| Макс. ток разряда 1 | 120A |
| Макс. эффективность | 97.60% |
| Напряжение старта | 125V |
| Номинальная выходная мощность AC и UPS | 5000W |
| Номинальный выходной ток AC | 22.7/21.7A |
| Обнаружение изоляционного резистора | Интегрировано |
| Охлаждение | Умное охлаждение |
| Пиковая мощность (вне сети) | 2 раза номинальной мощности, 10 С |
| Регулирование сети | VDE4105,IEC61727/62116,VDE0126,AS4777.2,CEI 0 21,EN50549-1,G98,G99,C10-11,UNE217002,NBR16149/NBR16150 |
| Связь с BMS | RS485; CAN |
| Степень защиты | IP65 |
| Стиль установки | Настенный |
| Стратегия зарядки Li-ion аккумулятора | Самоадаптация к BMS |
| Тип аккумулятора | Lead-acid или Li-lon |
| Тип сети | Однофазный |
| Шум | <30 dB |
| Эффективность MPPT | >99% |
-
$1,200.00





